How to Set Up Digora Imaging Integration

If you use the Digora^TM for Windows (Soredex^TM) imaging client, Sensei Cloud supports a one-way imaging bridge integration. This integration is set for both the Location and Patient.

Important: This is a one-way imaging bridge. Images acquired through Digora are not uploaded to the cloud or accessible directly in Sensei Cloud. However, the patient’s name and Patient ID connect the two systems to provide access to the images in Digora.

Location Setting

From the Administration tab, select Devices & Integrations > Imaging, and then select Digora as the Imaging software used in your location.

Note: If you have not installed the Imaging Bridge, follow the on-screen instructions.

Patient Setting

To select Digora from a Patient tab:

1. From the Patient tab, select Clinical > Images.
    
2. Click Install Imaging Bridge, if necessary.
3. Follow the prompts to select Digora.

Accessing Digora

When the Digora integration is established, click Acquire New Image. Sensei Cloud opens Digora and shares the patient name and patient ID, which are used to access the patient's images in the imaging software's directory.


For more information, see How to Set Up Imaging.